Tayfun T160F is a perfect example of a solid ice bank beer flash chiller. Unlike some other chillers that use glycol as a cooling agent, this particular unit uses ice-cold water. The product (whether it’s beer, seltzer, or juice) is chilled by running through a stainless steel coil that’s submerged into ice-cold water. This particular model features 6 product lines, which means that you can chill and dispense up to 6 different beverages.
Flash chillers like Tayfun T160F have a wide range of applications - they are typically used in situations where refrigeration is limited and cold plates or coils are impractical due to the required continuous supply of ice and drainage.
Main Benefits of Flash Chillers
- Easy to install - to special skills required
- Low service and maintenance costs
- Temperature can be regulated on a thermostat
- Can be used as pre-chiller for beer, juice or other soft drinks
Product Highlights
- 53’ stainless steel coil
- 6 product lines
- Ice sensor
- Manual thermostat
- Foam in place insulated bath
Specifications of Ice bank beer flash cooler Tayfun T160F
Part Number | T160F-1/2T6 |
Maximum Distance, Ft | 25' |
Capacity-Compressor (evap 20F), BTU/hr | 3100 |
Capacity-Ice Bank, BTU/hr | 7500 |
Ice Bank, Lbs | 53 |
Dedicated Circuit, Amp | 15 |
Voltage, Volt/Hz | 115/60 |
Power Consumption, Watt | 800 |
Compressor Power, HP | 1/2hp |
Thermostat, Type | Manual |
Number of Product Lines, Coils | 6 |
Coil Diameter, ID-OD, In | 1/4" - 5/16" |
Coil Length (total), Ft | 350 |
Pump Type, Part Number | FloJet SPC42 |
Pump Flow Rate, Gal/Hr (water) | 240 |
Refrigerant, Type | R134a |
Dimensions - WxDxH, In | 32x19x23 |
Weight Net/Gross lbs | 125/136 |
If you haven’t found an item or part you are seeking for don’t hesitate to contact our managers on email sales@beveragecraft.com to inquire about the availability. We have new arrivals each week and are always here to help.